The WiFi extender not working Tp Link is a very common problem that is faced by most of the extender users. If you see your Tp Link extender not working properly, it must be encountering certain issues within its console. Due to this problem, you may also observe your Tp Link extender Ethernet not working or 2.4GHz not working.
In simple words, these issues come up on your device if the device is having some problem related to the software or hardware. Although software issues can be fixed in no time, hardware issues take time and require a high degree of attention.
That is the reason we have prepared this Tp Link extender not working troubleshooting guide for our users. You will learn about the common causes of this problem and go through the troubleshooting steps.
Common Reasons Why Your TP link Extender is Not Working
We have listed some of the most common causes of Tp link AC1750 WiFi range extender not working. Please refer to the points given below:
- Poor Wi-Fi Signals
- Outdated firmware
- Incorrect Placement
- Interference/Too Many Connected devices
- No Host Connections
- Due to DFS Function
How to Fix the Tplink Extender Not Working Issues?
If you come across the Tp-Link extender 2.4GHz not working or Etherent not working, make sure you follow the below-listed instructions carefully:
Power cycle your Tp Link extender
The first thing you ought to think about doing is rebooting or refreshing your Tp Link WiFi range extender. Your device is prepared for further troubleshooting procedures after this. Your device’s power button can be pressed, or you can simply unplug it and then plug it back in.
Check the Connections
Secondly, you must ensure to cross-check the connections. Be sure that the extender is connected to a stable power supply. The wall outlet must be properly working or else you may see your Tp Link extender not working correctly.
Upgrade the Firmware of the Extender
Access the web control page by logging in to the Tp Link wireless range extender via tplinkrepeater.net. After choosing System Tools, select Firmware Upgrade. After that, update the firmware on your extender by following the on-screen instructions.
Change the Network Settings
Make sure the VPN service or MAC Filtration service is not enable on your router’s WiFi network. Login to your existing router and ensure firewall, VPN, and MAC Filtration is disabling. If ,you still observe your 2.4GHz not working, go to the next step.
Reset TP-Link Extender
You must reset your Tp Link extender using the reset button. Locate the reset button on your device and press it. Do not forget to hold down the reset button for a few seconds. After that, the device will revert to the factory default settings.
Move the Extender Close to the Router
You could try relocating the object a meter or two closer to the router. The performance of your wireless range extender will noticeably increase. Additionally, be sure that no solid walls or other wireless devices are surrounding the device. The majority of users reported that after taking this action, the Tp-Link extender’s red blinking light stopped. If the problem continues in your situation,
Turn Off Access Control Settings, Such as MAC Filtering
As already discussed in the aforementioned steps, disable all the features like MAC Filtration, VPN, firewall, or Access Control Settings. The device will start working as usual.
Final Word:
This was all about the Tp-Link not working problem. We hope you were able to fix the WiFi extender not working Tp Link issue without much hassle. First of all, you should always try to find the root cause of the problem. After that, you must go ahead with the troubleshooting process.
We hope this post helped you learn about the troubleshooting steps for your Tp Link extender. If you still come across any issues or experience any other problems, feel free to talk to our support team for more help.
